Fitting Guide
Preparation
Prior to applying the plate please be sure to clean the area the plate is being applied to. After cleaning the area where the plate will go, use the alcohol wipe provided to wipe down the area where your plate will be applied, to remove any fine contaminants.
Applying the Pads
Apply the sticky pads to the number plate and press each pad for approximately 10 seconds. The pads need to be spaced evenly.
It is best not to do this in a cold environment. Once attached , apply even pressure for 10-15 seconds
Alignment
The red tabs attached to the plate indicate the center of each plate. This is to help you center the plate on your vehicle using any central point or marker on your vehicle. If you are locating the plate away from the center, please disregard this step.
Levelling & Applying
With your fitting kit, we have also included a mini level. This is to help you attach your plate as straight as possible. The level can be placed at any point on the top of the plate.
Please ensure you are parked on a flat and level surface for this step.
Once you are happy it is leveled and centered, stick the plate to your vehicle.
